I figured I would start one these threads where we can post what we're currently working on.
For me, my 89 Crown Vic daily driver for the past 10 years had some frame rot I noticed about a year ago. It's gotten pretty bad so I finally found a replacement. (87 Grand Marquis for $500!).
Frame rot on the passenger's side:
It's a shame because the car was still in great shape. Here's what the rest of it looked like.
Day time pic:
Inspection was still good until the end of this year but the one I got this past January was a bit under the table (in NY only need to pass safety for cars over 25 years old... this is definitely a safety fail).
The Grand Marquis I bought had a bit of a rough idle when I got it but it ended up just being a bad vacuum line. Thankfully, the Crown Vic and Grand Marquis all share the same parts for the most part so I now have an abundance of extra parts.
The Grand Marquis:
I've been stripping the crown vic of all it's parts including the engine and trans.
I sold the interior seats for $200.That's 2/5s of the way to the $500 I spent to get the Grand Marquis! :) There's a few more parts I've been given offers on but I plan on keeping most. I've been driving these Ford Panther platform cars since 2006.
The Crown Vic at this point is basically just a shell on wheels. I'm undecided if I plan on taking any more off (cutting out panels). We'll see. I plan on dragging it to the auto recycler in the next week. Hopefully I'll get $150 for what's left of it.
So, yeah... this is what I've been working on. It's been causing COBOL Roguelike to be put on the back burner and I'm sort of itching to get back into that. Hopefully once the dust settles with this game of "musical cars" I'm playing right now.
I also own a 1978 Ford LTD for about 6 years now. No interesting projects going on with that but I am only the 2nd owner and it has 35k miles on it. I, for some reason, don't actually have a good pic of it... weird.
Can a car be worth less than the sum of it's parts. (Actually, it's worldwide.)
Can you weld?
I'm currently printing v3r0 of a Ranch-style house, 1:64 scale. This one's blue.
I just listed a yellow one:
Wife's expecting #2 s... more
In order for the car to be made safe enough to continue to drive, it would need a whole new frame from a donor car. That whole swap would cost a good amount of time and money (if you didn't do it yourself). I could have taken the frame from the Grand Marquis and swapped it into the Crown Vic ($500) ... more
So basically you'd have to rebuild the entire frame?
I need to learn how to weld too. It'd be great to take pieces I have and make something useful.
They've been selling slowly right now. I'm working on advertising a bit but have no idea how to do it right. I put a card in every package I s... more
And it's just an isolated spot. I've seen people weld sections before but it's still a ton of work. Sometimes I wish I lived somewhere things didn't rust (basically where there's no snow/salt) but then again, NY gets too hot for me as it is. Haha
Are there forums you can post your stuff in the ... more
I haven't looked too much in to them yet because I have no time. Sometimes I feel like I'm stealing moments to visit my 3D printer and print replacements for the ones that sold.
If I could just sell one building a day, that's somewhere around $300-1000 per month (depends on the building) more in... more
Especially if they're groups specific for model trains and such.
Also, what about eBay? I know they can hammer you with seller fees and such but it also has a large audience.
We're getting more checks? Sweet! :) I'm so out of the loop one what we're suppose to get or when.
There's a lot of guys looking for garages for their cars. If I had the space I'd be doing 1:24 garages too, but they won't fit on the printer (maybe a Prusa XL when that comes out?)
eBay is 12.55%, so it's not unreasonable. They've sold a few models for me this month.
It's not easy to keep u... more
the 1:64 stuff?
I guess 12.55% isn't so bad considering they make things really easy for both buyer and seller.
Speaking of keeping up. I'm not even sure the Treasury is keeping up. I've received the same "You're entitled to...blah blah blah... you need not do anything" message from Joe THRE... more
When the 1:64 stuff barely fits on the printer, the 1:24 stuff won't even slice. I'm not even sure if my smallest building will print at 1:24.
Most consignment shops take 20% or more, so it's way better than that. You do have to do most the work, though.
I haven't gotten anything yet from Jo... more
Or is this more for model car hobbyist?
Did you receive the letters in the mail? That's the one that I've gotten like 3 of.
I just checked my bank and I got my $300 direct deposited on 7/15.
Are you guys getting audited or something? We received our money a lonnnng time ago. I know the sta... more
It's too bad 1:64 is popular for cars and 1:87 is popular for trains. It'd be great to have more scale cars and inexpensive ones at that. Oh well. Looks like the 1:64 market sells well so I'll keep making buildings at that scale and print off only a few at 1:87.
I got a letter about "we think ... more
Made back the uhaul rental cost in weight of the metal.
Took the steering wheel off before leaving and then took the tires off at the scrapyard.
Now comes the daunting task of sorting and organizing alllllll the parts that have literally filled my whole garage. Yay...
y? Looks like you've got one there in place of the engine. Bet the car really moved well!
Looks like a pretty good job stripping that car down. You probably do have a lot of parts! Label label label.
I'm surprised at how much space lawn mower parts took up after I took them off a bad mower... more
That's actually my impact gun but I also have the screwdriver/drill. They're a life saver. I originally bought the Harbor Freight impact gun that was corded and it couldn't even take off the lug nuts on my tire. It's also huge and doesn't fit into anything confined. Waste of money. The Rigid one has... more
Not quite as nice as the Makita, but it has plenty of power and a good build so it's easy to use. The local model railroad club has some Hitachis (I bought them) and the driver can only be used on low speed. It's awful but it does the job.
You need to get a few things: Good plastic boxes, a lab... more
After seeing how well it worked for the cost, I got it too. (It was on sale.) I also have the Rigid circular saw but that doesn't really get that much use. It's nice the same batteries work for everything Rigid though. My FIL has some Makita stuff, nice stuff too.
So far, I don't have plastic bo... more
Just my opinion, but it seems like the plastics they use are really well suited to the "shoe box" size boxes and most the larger sizes are too weak. Sure, there's some nice ones out there but you'll pay way more than a decent cardboard box costs.
So label maker sorted! I found a DVD the other d... more